Misuse of chainsaws also known as chainsaws can result in serious injury or death. Each year, emergency rooms of hospitals serve approximately 30,000 terrible injuries with chainsaw. The most common injuries with chainsaws occur in the left leg and on the back of his left hand. These lesions are generally related to an effect of kickback by chainsaw and loss of control of the saw chain. Details on accidents with chain saws and techniques for risk reduction can help you avoid becoming a statistic.
Other people are reading : 3 Steps To Nurture Emotional Intelligence in Your Child
The effects of kickback or "kickback" occurs when the tip of the saw touches an object or when the wood closes in and jams the chain. The tip contact causes the chain saw back off immediately and push back and up (rotary motion). Clogging generates a straight movement back toward you (linear). In either case, you can lose control of the saw. To avoid kickback of the best chainsaws:
The chains can travel at speeds up to 60 miles /h, and 600 teeth per second passing through any given point ... is too fast for you to trust your reaction time to avoid injury. To control the saw properly:
Read the manufacturer's instructions chainsaw and make the most theoretical and practical training on the use of the chainsaw. Inspections and maintenance are essential, keep the mountains clean and in good working order. Sharpen your teeth and keep oiled the chain, with the proper tension to achieve better quality cuts and maximum safety.
Training, site preparation, safe working practices and the use of appropriate safety equipment can prevent injuries and deaths in using the chainsaw. You, the chainsaw operator can control these factors before each and every one of the cuts.
Key Facts can Reduce Injury from Chainsaws : WikiHealthBlog |
The effects of kickback or "kickback" occurs when the tip of the saw touches an object or when the wood closes in and jams the chain. The tip contact causes the chain saw back off immediately and push back and up (rotary motion). Clogging generates a straight movement back toward you (linear). In either case, you can lose control of the saw. To avoid kickback of the best chainsaws:
- Set the workplace so as to prevent accidental contact with other objects during cutting
- Use suitable cutting methods to prevent contact of the tip of the saw and chain jamming
- Use chainsaws equipped with an anti-kickback device installed at the tip of the chain
- Use a chain brake to stop the chain immediately if kickback occurs
- Use chains with regulators depth of cut and guards links that prevent the tip penetrates into the wood too
The chains can travel at speeds up to 60 miles /h, and 600 teeth per second passing through any given point ... is too fast for you to trust your reaction time to avoid injury. To control the saw properly:
- No "turn on" the mountains in the air or unsupported (“drop-start"), place it on the floor level and use both hands to set it up
- ALWAYS use both hands to hold the saw firmly
- Keep your right hand on the rear handle and pass your left hand on the handle on the front
- Hold the saw down and to the side to keep your body out of the cutting plane
- Clear the work area to eliminate tripping hazards, and spread your feet to work safely
- Do not cut above your head or from a ladder
- You do not rely on your reflexes to avoid injury with a chainsaw; Personal protective equipment is a protective armor between your body and teeth sharp and fast moving. Equip yourself you to use a chainsaw with the following:
- Avoid wearing loose clothing, jewelry, or hair loose near the moving chain
- Use a kickback safety guards i.e. safety helmet to protect against falling branches
- Use hearing protection as the noise of chainsaws can exceed 100 decibels
- Wear safety goggles and a protective mask to protect the eyes against chips and particles released into the air
- Use gloves with good gripping surface to help you control the saw
- Use chaps with Kevlar fibers that cover the entire leg and overlap on the ankle
- Wear boots with layers of Kevlar inside to stop the passage of the chain
Read the manufacturer's instructions chainsaw and make the most theoretical and practical training on the use of the chainsaw. Inspections and maintenance are essential, keep the mountains clean and in good working order. Sharpen your teeth and keep oiled the chain, with the proper tension to achieve better quality cuts and maximum safety.
Training, site preparation, safe working practices and the use of appropriate safety equipment can prevent injuries and deaths in using the chainsaw. You, the chainsaw operator can control these factors before each and every one of the cuts.